|
|
|
AUTOMATIC SCRUB STATION
|
|
SALIENT
FEATURES : SECO MODEL NO -ASS-I |
|
| Ø |
It is a modern and scientific technique
to scrub hands, washing instruments, scopes and dryer
used to dry in quick action. In this machine the water
is using for scrub is purely filtered and demineralized
by AQUA GUARD. Water is preheated to control the external
bacterias and impurities. This is a unique device designed
for the surgeon’s convenience to scrub. The device
facilitates the flow of water without opening or closing
any taps. It is operated on sensors conveniently placed
in front of the scrubbing person. As the sensors are
disturbed by presence of scrubbing person the solenoid
valves activates the water tank valve and thus the water
flows freely so long as the sensors are blocked (disturbed)
|
| Ø |
The water is housed within the scrub station in a stainless
steel tank (Capacity approximate 60 liters) i.e. temperature
of water may be controlled from ambient temperature
to about 75 degree C. Similarly a small container for
either liquid soap or any disinfector is housed within
the station. A small micro foot switch operates this
where liquid soap or any filled-in disinfector will
freely flow into the surgeon’s hands. It has also
an option that can regulate the flow at a preset quantity
say 2, 5, 7 or 10 ml.
|
| Ø |
A high-speed
jet water flow is provided for washing of rigid Endoscope
instruments and flexible scopes. |
| Ø |
The station
is provided with a standby conventional foot operated
tap in the event of power/ equipment failure. |
| Ø |
CONSTRUCTION :-
|
| The super
structure is constructed out of 304 quality stainless
steel square tubes and the entire bodywork made out of
304-quality Salem stainless steel sheet. The trough is
sloped down to one end connected to the water outlet tube,
which is curved to ensure that no water stays on the lower
end of the trough, while not in use. A water tank of stainless
steel, solenoid valve, outlet valve, gate valve, and transformer
unit are all housed within the station. Two or three front
doors are provided for maintenance and cleaning .The rear
portion of the station is fully exposed as it mandatory
placed against the wall. |
| Ø |
WORKING PRINCIPLE :-
|
|
Water directly passed through aqua guard and filled
in water reservoir where the heaters are fixed with
thermostatic arrangement with water level sensor. This
sensor controls the water level and switch off the solenoid.
It works on optical sensor where a person stand in front
of the water tap signal to solenoid and open the water
to scrub. Similarly soap and dry air arrangement is
working.
Scrub stations are made available in 3 sizes.
|
| Ø |
FOR
AUTOMATIC SCRUB STATION :
|
1. 90”
(L) X 24” (W) X 48” (H) For 3 persons scrub
2. 66” (L) X 24” (W) X 48” (H) For 2
persons scrub
3. 40” (L) X 24” (W) X 48” (H) For 1
person scrub |
| Ø |
FOR MANUAL SCRUB :
|
4. 90”
(L) X 24” (W) X 48” (H) For 3 persons scrub
5. 66” (L) X 24” (W) X 48” (H) For 2
persons scrub
6. 40” (L) X 24” (W) X 48” (H) For 1
person scrub |
| |
Other tailor made sizes are
available on request only………………
|
| Ø |
OPTIONS :
|
| |
-
|
A water
filter in the form of Aqua Guard, to be fixed before the
water enters the tank. |
| |
- |
A Voltage
stabilizer. |
| |
- |
A Sterile Air System for drying the hands etc.
|
| Ø |
TECHNICAL DETAILS
|
| |
Input: 220V
System work on microprocess control
Heater: 2000 W with Thermostat.
Motor: 1/8 H.P
Temperature: Maximum 50 degree C with
thermostat control
Water tank capacity: 80 Liters.
Jet wash: Optional switch
|
| Ø |
Optional Accessories
|
| |
-
|
SOAP CAKE
STAND |
| |
-
|
TOWEL HANGER
(S.S) |
| |
-
|
BRUSH BASIN
STAND (S.S) |
| |
SCRUB STATIONS can
also be FABRICATED to be FOOT
OPERATED MANUALLY.
|
| |
Scrub Station
Periodic Service = *First one year full service
as per clients preference.
Electrical Service = *Once in three months
|
| |
|
|
