SECO is a name of quality and quick
service, an asset to Hospitals, Pharmaceutical, Tissue
culture, Bio-fertilizer Laboratories and research institutions
with modest lizing needs, where lcontaminated objects
require Sterilization. Since last 25 years SECO have
made its primary objectives to help fight the spread
of infections, caused by pathogenic micro-organisms.
We represent most innovative and advanced technologies
in our products supported by our most efficient customer
support network.
CONSTRUCTION :
The unit has inner Chamber, Boiler,
Lid and Jacket - all made of 304 grade stainless Steel,
outer chamber of thick gauge mild steel. For controlling
Sterilization cycle, a three way valve or a multiport
valve - made of S.S. is provided. It is supplied complete
with vaccum beaker, water level indicator, steam trap
and automatic pressure control switch. The whole unit
is mounted on a robust tubular stand. It is available
in the following standard sizes. Operatable on 3 Phase,
440 Volts A.C. Supply.
MODE OF HEATING:
Electrically heated by special flange
type/immersion type heaters bearing ISI mark, to work
on 440 volts three phase 50 cycles.
WORKING PRESSURE
:
The pressure inside the chamber is
variable from 5 psi. to 20 psi. But the normal recommended
pressure for Sterilization process is 1.2 kgf/cm sq.g
( 15 psi - 17 psi )
WORKING TEMPERATURE:
121° C
HYDROSET PRESSURE:
2.5 kgf/cm sq.g ( 35 psi )
Working
Chamber
Width
Height
Depth
600mm
600mm
1200mm
600mm
900mm
1500mm
Note:
Special sizes can be fabricated as per the customer's
requirement.
Multiple
Operating Valve
:
To carry out all functions
of Sterilization cycle at one point i.e. steam
to jacket, steam to chamber, fast/ slow exhaust
and vaccum/ drying
Door
:
Single
door shall be fitted with radical shooting arm,
provided with automatic pressure locking device
so that the door can not be opened till chamber
pressure is fully exhausted.
Quick
vaccum Drying Apparatus
:
This
Allows the filtered and lized air to break
the chamber vaccum & helps in quick-drying.
Accidental
vaccum Breaker
:
A
safety device so jacket against accidential
vaccums in it and to remove residual air from
it.
Safety
Valve
:
A
safety device against excess pressure in jacket
and steam generator.
Dial
Type Thermometer
:
Indicates
Sterilization temperature
Plug
Screen
:
A
device to prevent chamber, discharge line from
lint / sediment.
Chamber
Condensate Line
:
Incorparated
with spirax thermSECOtic steam trap and check
valve for perfect condensation from chamber
to achieve optimum temparature
Steam
Generator ( Boiler )
:
-Shall
be attached to underneath the jacket. It shall
be fitted with -
-ISI
marked water immersion type industrial heating
elements.
-A
magnetic automatic water level float switch
to protect heater from low water level.
-Water
inlet & outlet valves.
-Water
level indicating gauge glass with SS guard and
with automatic water closing device in case
of breakage of glass tube.
-Automatic pressurestat switch
to control the boiler/jecket pressure.
Electrical
Control Box
:
Equipped with air break contractor
of ' CUT. HAMM' make, toggle switch and two
nos. indicating neon lamps.
We are manufacturers and suppliers of Autoclave equipment like hospital autoclaves, Water level cut off system
and portable autoclave. We provide you with the superior quality equipments.
We are exporting to Canada, Netherlands, Turkey, Morocco, Mexico,
United Kingdom, Germany, Nepal, Belgium, Israel, France, Italy, Singapore,
Philippines, Australia, India.
