SECO offers a comprehensive range
of high performance Horizontal, Laminar Flow Cabinets.
Modular construction, combining aesthetic appeal with
functional utility and efficiency. These are designed
to meet the filtration, illumination, Noise & Vibration
requirements and US Federal Standard 209 B (BS 5295),
providing air to meet class 100 (class I) conditions,
to the extent applicable.
Ideal for microbiological manipulations, work with bioassays
lity testing & research work, vial filling &
bunging operation in parenteral units & for general
dry-processing work in semiconductor industry etc. Provides
a comfortable ‘sit down’ working position
for the operators.
Ø
Construction
:– All Laminar Flow CLEAN AIRàcabinets
are basically constructed out of thick teak wood board,
which is termite and insect proof, fire retardant and
weather resistant. All exterior surfaces are covered with
white Laminates. Interior surfaces are epoxy painted.
Work table is made of mica top and side panels of thick
transparent plexiglass.
Ø
Air
Flow and Filtration :– Laminar Flow principle
involves double filtration of air. Atmospheric air is
drawn through pre filter and is made to pass through highly
effective HEPA (High Efficiency Particular Air) filters
having efficiency rating as high as 99.99% with cold DOP
and 99.97% with hot DOP, thus retaining all airborne particles
of size 0.3 micron and larger. Double filtered air blows
in laminar flow through the work table at designed velocity
of 90 ft. min. ± 20%.
Ø
Blower
Motor Assembly :– Duly balanced, direct
drive motor blower units sized to provide adequate air
flow volume over the entire surface of HEPA filter. Fitted
with reputed make motor and operates with minimum noise
level i.e. lower than 65 db on scale and Vibration less
than 2.5 um.
Ø
Lighting
:– Work area properly illuminated by diffused,
glare free fluorescent light.
Ø
Power
Requirement :– 230 V. 1 Phase, 50 Hz, Ac
Supply.
Ø
Optional
Accessories :–
-
Satin
finish S.S. Table Top (in lieu of Formica Top)
-
Transparent
front door
-
Static
Pressure. Inclined Manometer
-
Built
in U.V. Germicidal light
-
Cock
for gas, air or vacuum line
-
Cold
rolled MS Sheet body duly powder coated.
-
Stainless
steel body duly polished.
-
Particle
dust count validation at site after installation.
We are manufacturers and suppliers of Anaesthesia
Products like Airways, Endotracheal tube, and Bains
Circuit. We provide you with the superior quality products.
We are exporting to Canada, Netherlands, Turkey, Morocco, Mexico,
United Kingdom, Germany, Nepal, Belgium, Israel, France, Italy,
Singapore, Philippines, Australia, India.
