CLEAN AIR à
ACCESSORIES
à
VERTICAL
LAMINAR FLOW CABINET
SALIENT
FEATURES :
SECO-189
Vertical Laminar Air Flow Cabinet (Exclusive)
Ø
SECO offers a comprehensive range
of high performance Vertical Laminar Flow CLEAN AIRàCabinets.
Modular in construction, combining aesthetic appeal
with functional utility and efficiency. These are designed
to meet the filtration, illumination, Noise & vibration
requirements and US Federal Standard 209 B (BS 5295),
providing air to meet class 100 (Class I) conditions,
to the extent applicable.
These vertical laminar Down Flow configuration find
extensive application in Scientific, Medical and Industrial
application where a localized high quality clean working
environment is essential. These are designed to provide
an atmosphere free from airborne particles with Laminar
air flow flowing downward the work table.
Ø
Construction
:– All Laminar Flow Cabinets are basically
constructed out of thick teak wood board , which is termite
and insect proof, fire retardant and weather resistant.
All exterior surfaces are covered with white Laminates.
Interior surfaces are epoxy painted. Work table is made
of mica top and side panels of thick transparent plexiglass
Ø
Air
Flow and Filtration :– Laminar Flow principle
involves double filtration of air. Atmospheric air is
drawn through pre filter and is made to pass through highly
effective HEPA (High Efficiency Particular Air) filters
having efficiency rating as high as 99.99% with cold DOP
and 99.97% with hot DOP, thus retaining all airborne particles
of size 0.3 micron and larger. Double filtered air blows
in laminar flow through the work table at designed velocity
of 90 ft. min ± 20%.
Ø
Blower
Motor Assembly :– Duly balanced, direct
drive motor blower units sized to provide adequate air
flow volume over the entire surface of HEPA filter. Fitted
with reputed make motor and operates with minimum noise
level i.e. lower than 65 db on scale and Vibration less
than 2.5 um.
-
Lighting
:– Work area properly illuminated by diffused, glare
free fluorescent light.
-
Power
Requirement :– 230 V. 1 Phase, 50 Hz, Ac Supply.
Optional Accessories :–
-
Satin
finish S.S. Table Top (in lieu of Sunmica Top)
-
Transparent
front door • Static pressure inclined manometer
-
Built
in UV Germicidal light
-
Cock
for gas, air or vacuum line
-
Cold
rolled MS sheet body of top chamber duly powder coated,
available at extra cost.
-
Stainless
Steel body of top chamber, duly polished, available at
extra cost.
-
Particle
dust count validation at site after installation, at extra
cost.
We are manufacturers and suppliers of Anaesthesia
Products like Airways, Endotracheal tube, and Bains
Circuit. We provide you with the superior quality products.
We are exporting to Canada, Netherlands, Turkey, Morocco, Mexico,
United Kingdom, Germany, Nepal, Belgium, Israel, France, Italy,
Singapore, Philippines, Australia, India.
.jpg)