| Ø |
Display 0-1/2 Digits 1999 Counts LCD |
| Ø |
Provides 0-19.99mA & 0-24 mA current source |
| Ø |
Measure 0-19.99 mA & 0-24mA current |
| Ø |
Provides 0- ±199.9 mV DC Output |
| Ø |
Provides Power and Current measurement of two
loop Wire in the range of 0-19.99mA / 0-24mA |
| Ø |
Has basic accuracy of ±0.25% |
| MODEL
: SECO- FG 2000 (FUNCTION GENERATOR) |
| Ø |
Has Frequency Bandwidth of 0.2 ~ 2MHz |
| Ø |
Provides Sine wave, Triangle wave, Saw Wave and
Rectangular Wave output |
| Ø |
Provides signal amplitude output of 16Vp-p |
| Ø |
Provides amplitude attenuation 0dB, -20dB, -40dB |
| Ø |
Sine Wave Distortion is <=2% |
| Ø |
TTL/CMOS Output amplitude is >= 3Vp-p |
| Ø |
DC level and duty cycle is adjustable |
| Ø |
Square wave rise time <=2nS |
| Ø |
Output Resistance is 50W ±10% |
| Ø |
Outer measurement frequency 0.1Hz – 2NHz |
| Ø |
Has 6 digits Red LED Display |
| MODEL
: SECO-9205A (SWEEP FUNCTION GENERATOR) |
| Ø |
Used as a Function Generator, Pulse Generator
and Sweep Generator |
| Ø |
Provides Sine, Triangle, Square, Pulse, Ramp.
TTL Square Wave and Skewed Sine Waveform outputs |
| Ø |
Provides Sync. Out (TTL Square Waveform) |
| Ø |
Has VCF Input tunable by 0 to –10V DC |
| Ø |
Has DC Offset continuously variable, greater than
±10V (open Circuit) |
| Ø |
Has Frequency Counter that measures from 10Hz
– 3MHz |
| Ø |
Provides AM Modulation waveform |
| Ø |
Has Sweep Function |
| Ø |
Has Frequency Bandwidth of 3MHz |
| MODEL
: SECO-1682 (WHEATSTONE BRIDGE ) |
| Ø |
OXFORD Brand Wheatestone Bridge |
| Ø |
Used for Measuring Low resistance |
| Ø |
Measuring Range from 0.001W to 11.0mW |
| Ø |
With built-in galvanometer of sensitivity
of 20uA / mm |
| Ø |
Comes complete with Battery |
| Ø |
Housed in Wooden Body |
| Ø |
Has accuracy ±0.05% of series arm and
±0.02% for Ratio Arm |
| Ø |
Accuracy confirm to Grade AIS-1565-1966 |
| MODEL
: SECO-1612 (KELVIN DOUBLE BRIDGE) |
| Ø |
OXFORD Brand Kalvin Double Bridge |
| Ø |
Used to measure very low resistances |
| Ø |
Measures in the rage of 0.2uW to 11W |
| Ø |
Has an accuracy of ±0.05% ±1 small
division of the slideware |
| Ø |
Provides maximum current of 10A intermittently
and 5A continuous |
| Ø |
Comes complete with Spot Light galvanometer,
heavy Duty, High Current, Power Supply and conductivity
Arrangement |
