| MODEL
: SECO- 5030 (OSCILLOSCOPE) |
| Ø |
30MHz Dual Trace Dual Channel |
| Ø |
Vertical Deflection factor : 5mV/Div
~ 10V/ Div in 11 steps |
| Ø |
Rising Time : <=12ns |
| Ø |
Trigger Source : Y1, Y2, ALT, LINE,
EXT |
| Ø |
Min. : Trig: 5Hz ~ 30 MHz |
| Ø |
Synchronized Internal Sig.: 0.5 Div |
| Ø |
Trigger Level & Ext. Sig. : 0.2Vp~p |
| Ø |
TV: Int 2 Div, Ext 0.3Vp~p |
| Ø |
Trig Lock (20Hz ~ 10MHz) Int 2 Div |
| Ø |
Horizontal Deflection sweep rate:
0.1uS/Div to 0.2S/Div. In 20 Step |
| Ø |
X-Y Mode Deflection Factor: 5mV/Div
~ 10V/Div |
| Ø |
Z axis Min Input Level TTL Level |
| Ø |
System: Max Input Voltage 50V (DC+ACp-p)
Frequency Range CD ~ 5MHz |
| Ø |
Calibration Signal: 0.5V Square wave
@ 1kHz |
| Ø |
CTR display area: 8 Div x 10 Div (1
Div = 1 cm) |
| Ø |
Supplied with 2 Nos. 1:1 & 10:1
Switchable attenuation Probes |
| Ø |
Confirms to EN61010-1 and EN-IEC61326-1 |
| MODEL
: SECO- 5060 (OSCILLOSCOPE) |
| Ø |
60MHz Dual Trace Dual Channel |
| Ø |
Vertical Deflection factor : 5mV/Div
~ 5V/ Div. |
| Ø |
Horizontal System Sweep Mode: x1,
x10; x1, x10 alter |
| Ø |
Horizontal System Sweep Rate: 0.1uS/Div.
~ 0.2S/Div. In 20 steps |
| Ø |
Has X-Y Display mode |
| Ø |
Trigger system mode includes: auto,
normal, TV-V, TV-H |
| Ø |
Trigger system source includes INT,
CH2, Line, EXT |
| Ø |
For Z-Axis max. input Voltage is 30V |
| Ø |
Provides Calibration Signal of .5V
Square wave @1kHz |
| Ø |
CRT display area of 8 Div x 10 Div
(1 Div = 1 cm) |
| Ø |
Supplied with two Nos. 1:1 & 10:1
switchable probes |
| Ø |
Confirms to EN61010-1 and EN-IEC61326-1 |
| MODEL
: SECO- 5100 (OSCILLOSCOPE) |
| Ø |
100MHz Dual Trace Dual Channel |
| Ø |
Vertical Deflection Factor : 5mV/Div
~ 5V/ Div. |
| Ø |
Horizontal System Sweep Mode: A, B,
B TRIG’D, X-Y, ALT |
| Ø |
Horizontal System Sweep Rate |
| Ø |
0.05uS/Div. ~ 0.2S/Div |
| Ø |
0.05uS/Div. ~ 10uS/Div |
| Ø |
Has X-Y Display mode |
| Ø |
Trigger system mode includes: auto,
normal, TV-V, TV-H |
| Ø |
Trigger system source includes INT,
CH2, Line, EXT |
| Ø |
For Z-Axis max. input Voltage is 30V |
| Ø |
Provides Calibration Signal of .5V
Square wave @1kHz |
| Ø |
Provides Calibration Signal of .5V
Square wave @1kHz |
| Ø |
Supplied with two Nos. 1:1 & 10:1
switchable probes |
| Ø |
Confirms to EN61010-1 and EN-IEC61326-1 |
| MODEL
: SECO- 5060 (DIGITAL STORAGE OSCILLOSCOPE) |
| Ø |
60MHz Dual Channel Digital Storage
Oscilloscope |
| Ø |
Coloured VGA display |
| Ø |
Sampling Rate: 100Msa/s |
| Ø |
Storage Memory: 16K/ch |
| Ø |
Vertical Sensitive (/DIV):
2mV ~ 5V |
| Ø |
Vertical resolution: 8Bit |
| Ø |
Rise Time: 3.5nS |
| Ø |
Time-base Range (/DIV): 2.5nS ~ 5S/div |
| Ø |
Trig Source: CHI, CH2, Ext, Ect/5,
Line |
| Ø |
Trig Mode: Auto, Normal, Single-Time |
| Ø |
Max. Input Voltage: 400V (DC+AC peak) |
| Ø |
Auto Measurement: Vpp, Vmax, Vmin,
Vtop, Vbase, Vavg, Vrms, Freq, Rise Time, Fall Time,
Period, +Width, +Width |
| Ø |
Cursor Measurement: Manual, Trace,
Auto-Measurement |
| Ø |
Storage Function: 5 waves, 5 setups |
| Ø |
Power Supply: 100V ~ 240V/50W max |
