| Ø |
Display
|
Large Dual Bakelite LCD display |
| Ø |
Simultaneous display of temperature
& Humidity |
| Ø |
Measuring Range |
Temperature (Infra-Red Thermometer
Mode):- 50°C to 500° C, -58°F to 932°F
Humidity: 0%RH ~ 100%RH |
| Ø |
High Temperature accuracy ±
2.1\0% ±2°C/4°F |
| Ø |
Fast Response for humidity measurement |
| Ø |
Resolution |
0.1 for temperature up to 200°
and 1 for temperature over 200° 0.1% RH |
| Ø |
Data Hold and Max. Hold facility |
| Ø |
Auto Power Off, Low Battery Indication |
| Ø |
Semiconductor Sensor for temperature
incorporates as infra red Non Contact thermometer |
| Ø |
Has fixed emissivity of 0.95 |
| Ø |
With Semiconductor sensor temperature
can be measured from –20°C to 60°C/
-4°F ~ 140°F |
| Ø |
°C / °F Switchable |
| MODEL
: SECO- 3005 (DIGITAL THERMO-HYGRO METER) |
| Ø |
Display
|
Large Dual Bakelite LCD display |
| Ø |
Simultaneous display of temperature
& Humidity |
| Ø |
Measuring Range |
Temperature 20°C to 1000°
C, -4°F to 18322°F
Humidity: 0%RH ~ 100%RH |
| Ø |
High Temperature accuracy |
| Ø |
Fast Response for humidity measurement |
| Ø |
Resolution |
0.1°F and 0.1°C or 1°F
and 1°C, 0.1% RH |
| Ø |
Data Hold and Max. Hold facility |
| Ø |
Auto Power Off, Low Battery Indication |
| Ø |
Semiconductor Sensor for temperature
measurement |
| Ø |
In addition to this K type thermocouple
can also be used to measure temperature |
| Ø |
With Semiconductor sensor temperature
can be measured fro –20°C to 60°C /
-4°F ~ 140°F |
| Ø |
°C / °F Switchable |
| MODEL
: SECO- 5010 (OSCILLOSCOPE) |
| Ø |
10MHz Single channel Portable type |
| Ø |
Vertical Deflection factor: 10mV ~
10V/ Div |
| Ø |
Sweep Time Factor: 0.1uS/Div. ~ 0.1S/Div |
| Ø |
Trigger Sensitivity: Int: 1.5 Div
and Ext.: 0.3 Div |
| Ø |
X-Y Mode Deflection |
| Ø |
Factor: 0.2V/Div ~ 0.5V/Div |
| Ø |
Calibration Signal: Square wave of
0.5V @ 1kHz |
| Ø |
230V AC 50Hz Operated |
| Ø |
Supplied with 1:1 & 10:1 attenuation
Probes |
| Ø |
Confirms to EN61010-1 and EN-IEC61326-1 |
| MODEL
: SECO- 5020 (OSCILLOSCOPE) |
| Ø |
20MHz Dual Trace Dual Channel |
| Ø |
Vertical Deflection factor : 5mV ~
10V/ Div in 11 steps |
| Ø |
Rising Time : <=18ns and <=70ns
by MAG |
| Ø |
Trigger Source : Y1, Y2, ALT, POWER
EXT |
| Ø |
Min. : Trig: 5Hz ~ 20
MHz |
| Ø |
Synchronized Internal Sig.: 0.1 Div |
| Ø |
Trigger Level & Ext. Sig. : 0.2Vp~p |
| Ø |
TV: Int 2 Div, Ext 0.3Vp~p |
| Ø |
Trig Lock (20Hz ~ 10MHz)
Int 2 Div |
| Ø |
Horizontal Deflection sweep rate:
0.1uS/Div to 0.2S/Div. In 20 Step |
| Ø |
X-Y Mode Deflection Factor: 5mV/Div
~ 10V/Div |
| Ø |
Z axis Min Input Level TL Level
System: Max Input voltage 50V (DC+ACp-p) Frequency
Range CD ~ 5MHz |
| Ø |
Calibration Signal: 0.5V Square wave
@ 1kHz |
| Ø |
CTR display area: 8 Div x 10 Div (1
Div = 1 cm) |
| Ø |
Supplied with 2 Nos. 1:1 & 10:1
Switchable attenuation Probes |
| Ø |
Confirms to EN61010-1 and EN-IEC61326-1 |
