Most suitable for use in controlled areas / clean
room Temp. from 50 to 250°C ± 1°C controlled
by digital Temp. Controller cum Indication
Ø
INTRODUCTION
:–
Pursuant
to our continuous R&D, these Dry Heat lizers have
been specially developed, keeping in view requirement
for use in controlled area like parenteral section in
pharmaceutical industries & clean rooms, in Electronics
Industries, Research Lab., Medical & Agriculture,
Space Research, Atomic Energy etc. These are also known
as “ le Hood”.
Ø
SALIENT
FEATURES :–
The unique modular design of these Dry Heat lizer
have the built in advantage that fresh air is sucked
into the lizer through HEPA filters, which are
DOP tested for efficiency of 99.97% down to 0.3 micron
particle size. Pre-filter is also provided to extend
the life of HEPA filter. The specially designed air
blower unit has balanced, light weight, blower &
motor of reputed make. The air recirculation system
ensures uniform heating of the chamber & works on
the principle of heat convention & hot air recirculation.
Air exhaust outlet is also provided to make up for fresh
air. It is easy to replace the filter.
These have been aesthetically designed with functional
utility & efficiency. These equipment are very useful
for use in controlled/clean areas in pharmaceutical
manufacturing & find wide acceptance in variable
application in different industries engaged in manufacture
of le product. In the heart of design of these
equipment is the principle of judicious combination
of Dry Heat lizer with built in “HEPA Filtered
fresh air suction device. These are most suitable for
use in controlled areas/clean room. Temp from 50-250°C
± 1°C is controlled by digital temp. controller
cum indicator (D.T.C).
Ø
CONSTRUCTION:–
These are of tripled walled construction.
Outer
Body :– Made of CRC sheets duly pretreated for
surface treatment in seven tank dipping process &
epoxy powder coated for attractive finish.
Inner
Chamber :– Made of highly polished SS sheet or
anodized aluminium. It is provided with arrangement for
keeping shelves at convenient height.
Shelves
:– Made of SS sheet / Aluminium Sheet, as per material
of chamber, are provided.
Middle
Walls :– Made of G.I. Sheets.
Insulation
:– The gap between the outer & middle wall is
filled with special grade insulation to prevent heat loss.
Heating
Element :– Heating Element of suitable capacity,
are provided in the air circulation path. These are made
of high grade nickel chromium wire & duly insulated.
Temperature
Control :– Temperature controlled by Digital
Temperature Controller cum Indicator (D.T.C) from 50°C
to 250°C ± 1°C. The temperature can be
easily set & in indicated & controlled by the
controlled as per requirement.
Ventilation
:– Air Ventilator ports are provided.
Fresh
Air Filtration Device :– Fresh air is sucked
into the lizer through suction devices comprising
of HEPA filter, Air blower motor unit, ducting & air
circulation plenums around the chamber. Rest air is recirculated.
Ø
CONTROL
PANEL :–
The control panel housed with DTC, ON/OFF Switch, Indicating
light, high/low temp. switch etc., is easily accessible.
Power
supply :– Equipment is suitable to operate on
230V, 1 phase, 50 Hz, AC supply. It is supplied complete
with cord & plug.
Size of inner chamber
:–
W
×
H
×
D
No. of Shelves
455
×
455
×
455 mm
2
605
×
605
×
605 mm
3
-
Other sizes on request.
-
Optional Accessories
:–
-
Timer
-
Microprocessor
controlled PID temperature controlled cum indicator.
We are manufacturers and suppliers of Anaesthesia
Products like Airways, Endotracheal tube, and Bains
Circuit. We provide you with the superior quality products.
We are exporting to Canada, Netherlands, Turkey, Morocco, Mexico,
United Kingdom, Germany, Nepal, Belgium, Israel, France, Italy,
Singapore, Philippines, Australia, India.
