SECO-440
BOD Incubator "Super Deluxe” with Solid State
Ø
Most versatile and highly reliable low temperature
incubator, to make Biochemical Oxygen Demand determinations
and for preservation of vaccines, insulin, lever extracts,
chemicals etc.
Ø
CONSTRUCTION
:–
Robust Construction. Outer cabinet is made of M.S.
Sheet, duly pre treated & finished with epoxy powder
coated paint for lasting finish. Inner chamber is made
of high polished stainless steel/aluminium (anodized).
It has provision for allowing wide range of shelf positions
& spacings. SS/Aluminium trays are also provided.
Chamber is duly insulated to minimise heat loss. Two
door are provided. Outer door is insulated and is fitted
with magnetic tape for air tight closing for no temperature
loss. Door is provided with lock and key. Inner door
is made of transparent acrylic glass for inspecting
the specimens inside chamber, without opening the door
and with minimum temperature loss.
Ø
TEMPERATURE
CONTROL:–
The heart of the SECO B.O.D. Incubator is the excellent
and reliable solid state temperature controller cum
indicator digital display, range from 5°C to 50°C
± 0.5°C. Hermetically sealed, high performance
compressor works efficiently to lower the inside chamber
temperature. Heating elements are placed in the path
of moving air duly insulated from the body. Cooling
coils also lie in the air circulation path. Air is circulated
by a double shaft self-cooled, blower to keep the temp.
uniform throughout the inner chamber. A safety thermostat
is provided, which switches off the heaters in the event
of failure of the normal temp. control system to protect
the specimens from excessive heat. Also fitted with
a door operated lamp for illumination inside the chamber.
Caster wheel provided at bottom for easy mobility.
Ø
CONTROL
PANEL :–
All controls
and circuitry are housed at the top of the incubator and
therefore protected from spillage. Separate indicator
lamps for mains, heating and cooling are fitted. Temperature
setting fine and coarse knobs allow the user to set any
desired temp. A Voltmeter is provided on the panel to
read the incoming voltage.
Ø
SALIENT
FEATURE:–
SECO BOD INCUBATOR switches
from heating to cooling and vice versa irrespective of
the ambient temperature because of its unique design and
thus is capable of working without any user intervention.
Supplied complete with 3 shelves of anodized Aluminium
or Stainless Steel as per the chamber, cord and plug,
to work on 220 Volts, 1 Phase, 50 Hz, AC supply.
-
Optional
Accessories (SECO–440) :–
-
Interior
illumination with 3 Nos. fluorescent tubes.
We are manufacturers and suppliers of Anaesthesia
Products like Airways, Endotracheal tube, and Bains
Circuit. We provide you with the superior quality products.
We are exporting to Canada, Netherlands, Turkey, Morocco, Mexico,
United Kingdom, Germany, Nepal, Belgium, Israel, France, Italy,
Singapore, Philippines, Australia, India.
