SECO-442
Laboratory Biological Incubator Super Deluxe for Environmental
studies (Environmental Chamber/ Growth Chamber) Phytotron
Ø
These are well designed for conducting different
Laboratory & Research experiments to study growth
of plants and animals under controlled environmental
conditions and also in the fields of enzymatic digestion
processes, incubation etc.
Ø
CONSTRUCTION
:–
Robust construction.
Interior made of polished S.S. sheet, intermediate walls
of G.I. Sheet and Outer cabinet is made of M.S. Sheet
duly pretreated & finished with epoxy powder paint.
Glass wool insulation is provided to prevent thermal losses.
Double walled door with a gasket seals the inner chamber
from outside air. Viewing glass window allows inspection
of samples without opening the door or disturbing the
temperature. 4 S.S. adjustable shelves are provided. Air
ventilation and arrangement to introduce fresh air supply.
Ø
COOLING/HEATING
SYSTEM:–
Cooling
is achieved by refrigeration system using a hermetically
sealed air cooled compressor and other parts of high quality.
This system is fixed at the lower part of the incubator.
Cooling coil is fixed in the rear/side portion of the
chamber in the path of moving air. Heating is provided
with heaters duly insulated from the body & are fixed
near the cooling coil. The blower circulate the air into
chamber through heaters/cooling coils to ensure uniformity
of temperature inside the chamber.
Ø
TEMPERATURE.
CONTROL :–
Temperature is controlled
by solid state electronic temperature controller cum indicator
digital display using Pt 100 RTD sensor device. Temp.
range 1°C to 50°C ±1°C.
Ø
HUMIDIFICATION
:–
It is controlled by
humidistat and is achieved by spraying water vapor inside
the chamber with the help of pump/air compressor. This
system create the require humidity from ambient to 95%
±3% RH. Arrangement exists only for increasing
the humidity & not for decreasing the humidity.
Ø
ILLUMINATION
:–
High intensity illumination
of approx 12000 LUX is provided inside the chamber by
fluorescent tubes, cyclically creating day/night conditions
automatically controlled through 24 hrs. timer.
CONTROL
PANEL:–
All control,
expect humidistat, are fitted in the front panel for humidity,
illumination, timer, etc. & are easily accessible.
-
Power Supply
:– Suitable to work on 230 Volts, 50 Hz, Single Phase,
AC supply.
-
Available
in following chamber sizes :–
-
W ×
H × D No. of Shelves
-
665 × 856 ×
550 mm 3
-
765 ×
1365 × 670 mm 4
-
Optional
Accessories :–
-
Voltage Stabilizer 5
KVA
-
Two set point digital
temp. controller cum indicator.
We are manufacturers and suppliers of Anaesthesia
Products like Airways, Endotracheal tube, and Bains
Circuit. We provide you with the superior quality products.
We are exporting to Canada, Netherlands, Turkey, Morocco, Mexico,
United Kingdom, Germany, Nepal, Belgium, Israel, France, Italy,
Singapore, Philippines, Australia, India.
