| |
|
|
PROJECTORS à
PROFILE PROJECTOR |
|
|
|
|
|
|
| Screen |
: |
|
250mm
Antiglare hard glass screen, rotatable through 360º
having least count 6 minutes of an arc.Provided with four
clips to hold overlay charts & drawings. |
|
| Magnification |
: |
|
10x
Standard |
| Field
of View |
: |
|
25mm |
| Working
Distance |
: |
|
Contour/Surface
50mm |
| Illumination |
: |
|
Contour
Illuminator 24V/150W (Halogen)
A Green Filter incorporated into optical system is specially
convenient as it reduces eye strain, improves contrast
& eliminates any trace of residualchromatic aberration.
Lamp is cooled by turbine type silent fan. Light Intensity
control system allows different intensities as per requirement.
Surface Illuminator 12V/100W (Halogen)
Double light source with dichoric halogen lamp (cold
reflector type) with facetted surface for bright illumination.
Heat absorbing filters are incorporated to the system
as standard equipment, thereby avoiding excessive over
heating of the piece being inspected. Surface illumination
can be used simultaneously with contour projection. |
| Cooling |
: |
|
Built-in
noiseless and vibration free cooling fan. |
| Cross
Travel Stage |
: |
|
Size
125x125mm
Tabel Trave upto 50x50mm (with the use of Gauge Blocks).
Micro-Head standard 0-25mm, least count 0.01mm. Rotary
Stage Glass Diameter 62mm. |
| Optional
Accessories |
: |
|
Digital
Micrometers LC 0.001mm & Projection Objectives lenses
20x & 50x |
| OPTIONAL
ACCESSORIES FOR PROFILE PROJECTORS |
| PP-1 |
Center Holding
Devices : With angular Movement upto 10-degrees
on either side for checking angular measurement. |
| PP-2 |
V Block : Set
of 2 Nos. with clamps size 24 x 16 mm. |
| PP-3 |
VEE Support :
With spring clamps for inspection of parts without
centers or contour bores. |
| PP-4 |
10X magnification
for Model RPP-12 and 12A. |
|
