Fume Exhaust Hoods are designed to contain and exhaust toxic, obnoxious harmful vapours, mists etc. particularly for protecting laboratory personnel and equipment. A motor blower system generates negatives pressure within the encloser extracting the contaminated air from the work area and expels it into the outside atmosphere.

Highly recommended in different laboratories like Biochemistry, soil test, Food Microbiology Pharmaceuticals units, printed circuit board etching and cleaning operations, miniature component assembly etc. These are capable of handling corrosive fumes of sulphuric & Hydrochloric acid etc.
Construction:
Fume Hoods are made of Board and painted with your choice collur with working space covered with Stainless Steel 316 Qlty. Acid resistant. The work surface is fitted with small wash basin of size 250 x 200 x 150 mm depth of Stainless Steel 316 Qlty. with good quality tap. A gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight. Chamber is provided with Flourescent Lighting arrangement for easy working. The space underneath athe work-station is provided with storage compartment for proper uses. The front fascia is provided with a panel incorporating 15/5 Amp. Socket with switches for light and exhaust system supplied with cord and plug to work on 220/440 Volt 1/3 phase 50 Hz A.C. Front opening of the Fume Hood will be H 585 x W 910 mm. Complete with Exhaust System having 38mm Exhaust fan with Stainless Steel Deck & Duct to take out Fumes.

SIZE OF HOOD (INTERNAL)
D 600X W 600 X H 1200mm
EXTERNAL SIZE:
D-625 X W 1225 X H 2082 mm
Minimum Door space required for entry of Fume Hood 915mm.