STERILIZATION à CYCLINDRICAL HORIZONTAL STERILIZER

Introduction
The sterilizer is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through. All models work on the principle of downward displacement of air which is the most economical method of obtaining STERILIZATION .
Robust and rigid construction, designed for all types of bulk STERILIZATION which are commonly needed in Medical, Agricultural and Pharmaceutical Institutions.
Suitable for Sterilizing hospital dressings, linen, rubber, plastic goods, surgical instruments, glasswares, utensils etc.

Construction
Triple walled with steam jacket and separate boiler Inner chamber and steam jacket are made up of Heavy gauge S.S. Sheet with leak proof argon-arc welding.
The sterilizer has single piece door made of stainless steel. Back plate and ring is also made of thick stainless steel sheet. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure.
Mounted on tubular steel frame with ground levelling screwed flanges. The Outer jacket is wrapped with asbestos sheet or glass wool to minimise the heat losses due to radiation and is covered by polished stainless steel sheet for that elegant appearance.

Steam Generator
Made of heavy stainless steel sheet. Heavy ring mounted in front of the boiler with folding thick stainless steel
plate is fitted with heating elements and low water level cutoff device to protect the former from burning out dry.
Front folding plate system provides for easy cleaning of the deposited scale on the elements and the walls for long life and efficiency. Fitted with water gauge glass for water level indication, water inlet and outlet valves.

Pressure Control
The “PIEZOSTAT” (Pressure control device) is incorporated in all electrically operated sterilizers. It economises on power consumption and reduces the frequent opening of the steam release valve and thus prevents the release of steam in the room, It cuts off the power supply to heaters when the set pressure is achieved and re-energises the heating elements when pressure falls below the set point.

Heating Elements
Flanged type, immersion heating elements are made of high grade material and duly ISI marked.

Single Point Control
Complete sterilizing cycle is controlled from one point with the help of “Multiport Valve” fitted at front top. Two speeds of steam exhaust are available; fast and slow.
Easily readable jacket and chamber pressure on gauges mounted on the multi port valve. A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening of the subject matter to be sterilized.

Switch Box
Houses the PIEZOSTAT, main switch, pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.