|
|
|
CLEAN AIRà
MODULES à
RECTANGULAR
HORIZONTAL STERILIZERS |
|
SALIENT
FEATURES : |
|
| SECO-408
H.P. Rectangular Horizontal lizer |
| Ø |
INTRODUCTION: |
The
sterilizer is based on the principle that microbiological
action of saturated steam at elevated temp is rapid and
thorough. All models work on downward displacement of
air principle which is most economical method of obtaining
for all types of bulk Sterilization which are commonly needed
in Medical, Agricultural and Pharmaceutical institutes.
Suitable for lizing hospital dressings, linen, rubber
plastic goods, surgical instruments, glasswares and utensils
etc |
| Ø |
CONSTRUCTION: |
Robust and
rugged all weld construction which is leak proof unlike
riveted construction. Inner chamber is made of thick plate
of Mild Steel of non magnetic stainless steel of 304/316
quality and jacket is made out of rolled steel.
lizers will have single door made out of rolled steel
lined with S.S. sheet on both sides. All the lizers are
hydraulically tested to withstand 2.5 times the working
pressure.
The steam jacket is lined on the outer side with asbestos
sheet or glass wool which prevent heat losses due to
radiation and is covered by strong rolled steel sheet
duly painted |
|
| Ø |
BOILER:
|
| Made of thick
stainless steel plate suitably located under the lizer.
High grade flanged type heating elements are fitted from
front side for easy replacement/repair. Fitted with water
gauge glass for water level, safety valve, water inlet
and drain valves. It is also provided with Low Water Level
cut off device. This device protects the heater in the
generator from burning out dry. The steam pressure in
the boiler is indicated on a individual pressure gauge. |
|
| Ø |
SAFETY
LOCK FOR DOOR: |
Every horizontal
rectangular lizer is fitted with SELF LOCKING SAFETY DOOR
which cannot be opened when the chamber is under pressure.
The clutch mechanism automatically disengages the threads
of the radial locking system for precluding any eventuality
of accident when the chamber is under pressure. A heat
resistant Neoprene Rubber gasket ensure steam tight fitting. |
|
| Ø |
PRESSURE
CONTROL: |
Electrically
operated “PIEZOSTAT” (Pressure Control Device)
is incorporated in all electrically operated lizers. It
economises power consumption and limits the use of release
valve which would frequently blow steam into the room.
It cuts off the power supply to heaters when the set pressure
is achieved and re-energises heaters when pressure falls
down. |
|
| Ø |
Sterilization: |
| Complete
lizing cycle is controlled from one point with the help
of “Multi port valve” fitted at front top. Two
speeds of exhaust are available for evacuating.
|
|
| Ø |
THE
CHAMBER: |
| Two separate
valves provided for evacuating air and steam from inner
chamber and jacket as and when desired. A steam trap is
fitted in the chamber discharge line to eliminate the
condensate automatically. |
|
| Ø |
SWITCH
BOX: |
| Houses the
Pressure control switch, Main switch, Pilot lamps, relays
etc. and mounted on the stand of the lizer for easy operation. |
|
| |
|
Other
Features |
|
| |
- |
TRIPLE SAFETY
: The lizer is provided with triple safety.
|
|
| |
- |
(a) By a
pressure control switch which automatically limits the
pressure to the required set valve. |
| |
- |
(b) Two spring
loaded safety valves one each at chamber and boiler level. |
| |
- |
(c) A dead
weight safety valve at chamber level.
|
|
| |
- |
A PLUG SCREEN
prevents the discharge line from choking. The plug is
easily removable for routing cleaning.
|
|
| |
- |
A powerful
Ejector (for drying lized linen) circulates air through
the chamber. The circulating air passes through a corrosion
resistant metal wool filter.
|
|
| |
- |
A Dial thermometer
is provided to show the chamber temperature.
|
|
| |
- |
AUTOMATIC
VACUUM BREAKER is provided to break vacuum case of vacuum
formation due to steam condensation. |
| |
- |
Operating
Temperature and pressure :–
|
|
| |
- |
lizing Temp.
: 121°C.
|
|
| |
- |
lizing Pressure
: 1.2 to 1.5 kg/Cm2, (15 psi to 22 psi)
|
|
| |
- |
Optional
Accessories
|
|
| |
- |
Chamber/Jacket
of S.S. 316
|
|
| |
- |
Door of S.S.
304/316
|
|
| |
- |
Additional
Tray/Shelves
|
|
| |
- |
Carriage
& Trolley |
|
| |
- |
Direct steam
supply from centralised boiler
|
|
| |
- |
Temperature
recorder
|
|
| |
- |
High pressure
High vacuum model
|
|
| |
- |
Additional
door (Double door) model.
|
|
| |
- |
Fully automatic
micro processor controlled model
|
|
| |
- |
Spare Accessories
|
|
| |
- |
Pressure
gauge/Compound gauge
|
|
| |
- |
Water level
gauge glass
|
|
| |
- |
Dial thermometer
|
|
| |
- |
Non return
valve
|
|
| |
- |
Moisture
trap
|
|
| |
- |
Jointless
Gasket :– Neoprene/silicon rubber
|
|
| |
- |
size : 400
& 500mm |
|
| |
- |
Heating elements
(Flange Type) Rating kw 6.0, 9.0 |
|
| |
- |
Available
in following capacities |
|
| |
| |
W |
|
H |
|
D |
load
|
|
| (a) |
600 mm |
× |
600 mm |
× |
1200 mm |
18 kw |
Electrically Operated |
| (b) |
600 |
x |
900 |
x |
1500 |
36 kw |
Electrically Operated |
| (c) |
900 |
x |
1050 |
x |
2100 |
|
Steam Operated |
| (d) |
1050 |
x |
1200 |
x |
2100 |
|
Steam Operated
|
|
