| Request For a Quote and Catalouge
|
WASTE MANAGER à METAL SHARPS MANAGER  |
|
|
| Techanical Specifications:- |
| |
|
| Shreeding Capacity of the system |
22 kg/hr |
| Quantity |
1 No. |
| Operating parameters |
1) The metal sharps collection container should have a leak-proof sliding metal bottom
2) The system should have an inbuilt mechanism for shredding and hot air oven for Sterilization, which has digitally controlled thermostatic system.
3) The residence time of the metal sharps at the Sterilization unit should be 2 hr at 164°C |
| Operating standards |
The standards mentioned in the Techanical Specification and when no applicable standard is mentioned, to the authoritative standard appropropriate to the goods and such standards, shall be the greatest issued by the concerned insitution. |
| Equipment Details:- |
It should be a compact system of dimensions 90x86x130 cm, comprising of two units, shredder and Sterilization chambers. A 3 HP motar should be used for rotation of two shafts for shredding of metal sharps. Metal sharps include needles, blades and scapels. The standard size of metal sharp collection box should be 15 x 15 x 15 (cm). There should be two inputs for electricity , one for the shredder and one for the lizatiion chamber. The size of shredded waste would be around 5±2 mm. This shredded waste will go for Sterilization. The size of the Sterilization chamber should be 33 x 14 x 9.5 (cm). The temperature of 160-180°C should be achieved in this chamber . The temperature should be contrOLLED by a digital system. |
| |
| Metal Sharps Collection Box : : : "SECO" |
|
Made of Stainless steel,
Size :- 15cm (B) x 15cm (W) x 15cm (H)
Size :- 15cm (B) x 15cm (W) x 25cm (H) |
|
|
| |
